CONSTRUCTION AND PUT UP

ROPES ARE AVAILABLE IN:


• 12-STRAND PLAITED CONSTRUCTION (TORQUE FREE)
  
  SUPERTHANE COATED (STEELITEŽ 12 AND 12-XTRA)
  
  
  FOR HIGHER ABRASION RESISTANCE
• SUPERLINE CONSTRUCTION
  
  CIRCULAR BRAIDED PROTECTIVE COVER OVER
  
  
  CENTRAL CORE/S.
  
  CORE TYPES:
  PARALLEL S AND Z TWISTED 3-STRAND ROPES (TORQUE FREE)
  
  
  6-STRAND CABLE LAID ROPE
  
  12-STRAND PLAITED ROPE (TORQUE FREE)
  
  

PROPERTIES

RELATIVE DENSITY:	STEELITEŽ 12 AND 12-XTRA: 0.97 SUPERLINE: WILL VARY DEPENDING ON PROTECTIVE COVER TYPE
TEMPERATURE RESISTANCE:	MELTING POINT 145-155 °C
UV RESISTANCE:	STEELITEŽ 12 AND 12-XTRA: GOOD SUPERLINE: EXCELLENT
ELONGATION:	4% AT BREAK GOOD
FLEXIBILITY:	LIGHT WEIGHT AND FLEXIBLE FIBRES DO NOT ABSORB WATER AND REMAIN FLEXIBLE WHEN WET
CHEMICAL RESISTANCE:	GOOD ENVIRONMENTAL RESISTANCE APPLY FOR SPECIFIC CASES

TYPICAL APPLICATIONS

• WINCH LINES
• MOORING LINES
• TOW LINES
• TUG ASSIST LINES
• DEEP WATER LIFT LINES
• PIPE PULL LINES
• WIRE ROPE REPLACEMENTS
• HEAVY DUTY SLINGS
• FISHING LINES
• OCEANOGRAPHIC CABLES
• SUBMERGE TURRET LIFT ROPES
• TETHERS

MASS AND BREAKING STRENGTH

		STEELITEŽ 12 SUPERTHANE COATED		STEELITEŽ 12-XTRA SUPERTHANE COATED
COILS SUPPLIED TO LENGTH WHEN MEASURED UNDER REFERENCE TENSION TO EN 919.
DIAM/ MM	MASS KG/100M	MINIMUM BS/TON	AVERAGE BS/TON	MINIMUM BS/TON	AVERAGE BS/TON
12	7.71	13.5	14.8	15.5	17.1
14	10.9	17	18.0	19.5	21.5
16	14.4	21.9	24.1	25.2	27.7
18	18.2	26	28.6	29.9	32.9
20	22.3	31.7	34.9	36.5	40.2
22	26.7	37.2	40.9	42.8	47.1
24	32.4	43.8	48.2	50.4	55.4
28	41.8	55.9	61.5	64.3	70.7
32	53.4	69.4	76.3	79.8	87.8
36	66.2	87	95.7	100	110
40	80.2	105	116	121	133
44	95.4	127	140	146	161
48	112	147	162	169	186
52	130	164	181	189	208
56	148	193	212	222	244
60	169	210	231	242	266
64	190	237	261	273	300
68	213	262	288	301	331
72	236	297	327	342	376
76	261	330	363	380	418
80	288	361	397	415	457

MASS AND BREAKING STRENGTH

		SUPERLINE STEELITE PARALLEL CORES		SUPERLINE STEELITE -XTRA 6-STRAND OR 12- STRAND CORE
COILS SUPPLIED TO LENGTH WHEN MEASURED UNDER REFERENCE TENSION TO EN 919.
DIAM /MM	MASS KG/100M	MINIMUM BL/TON	AVERAGE BL/TON	MINIMUM BL/TON	AVERAGE BL/TON
28	45.8	47.5	52.3	62	65.3
30	47.7	51.3	56.4	67	73.7
32	67.1	60.4	66.4	73	83.1
34	73.1	68.7	75.5	83	91.3
36	77.4	73.6	81	93	102
40	87.3	90	99	113	122
44	104	107	117	134	147
48	138	126	138	164	179
52	173	147	161	194	202
56	190	169	185	228	232
60	208	193	212	262	281
64	245	243	267	307	334
68	266	269	295	343	369
72	285	302	332	379	415
76	316	336	369	427	459
80	334	373	410	456	500
88	424	453	498	538	575
96	492	533	586	625	676
104	601	626	688	743	783
112	701	733	806	831	911
120	918	839	922	953	1045

DYNEEMA® SK60 ANDSK75 ARE TRADE MARKS OF DSM
STEELITE® IS A TRADE MARK OF MARLOW ROPES

Enter breaking strength in DAN to get it in KG or in TONS:

Enter breaking strength in DAN to get it in KG or in TONS: